Crystal Clear Epoxy Resin In Rajasthan

Crystal Clear Epoxy Resin is a two-part system (resin + hardener) designed for coatings, casting, and art projects where clarity, durability, and a glass-like finish are essential. Below are the detailed features, properties, uses, and best practices for working with crystal clear epoxy resin:

 Key Features

High Transparency: Cures to a glass-like, water-clear finish.

 UV Resistance: Some formulations include UV stabilizers to reduce yellowing over time.

 Self-Leveling: Flows and levels out evenly, great for coatings and river tables.

High Gloss Finish: Polishes well for a mirror-like finish.

Durability: Scratch-resistant, moisture-resistant, and impact-resistant.

 Non-Toxic (When Cured): Safe for use in art, furniture, and even food-safe (if certified).

  Technical Specifications (Varies by Brand)

Property Typical Range

Mix Ratio (Resin:Hardener) 1:1 or 2:1 by volume

Pot Life (Working Time) 20–60 minutes

Cure Time 24–72 hours (full cure)

Viscosity Low to medium for clear casting

Pour Depth 1/8" to 2" per layer (depends on type)

Hardness (Shore D) ~80–85 D

Heat Resistance ~120–150°C (can be higher with additives)

  Common Uses

Art & Crafts: Resin art, jewelry making, geodes, coasters.

 Woodworking: River tables, tabletops, bar tops.

 Encapsulation: Flowers, insects, memorabilia.

 DIY Projects: Tumblers, countertops, molds.

 Best Practices for Use

Surface Preparation:

 Ensure surface is clean, dry, and dust-free.

 Use masking tape for edges.

 Mixing:

 Mix slowly and thoroughly to avoid bubbles.

 Stir for 3–5 minutes, scraping sides and bottom.

 Pouring:

 Pour in layers for deep molds (>1 inch).

 Use a heat gun or torch to remove bubbles.

 Curing:

 Maintain room temperature (~22–25°C or 72–77°F).

 Avoid humidity and dust during curing.

 Safety:

 Wear gloves, goggles, and work in a ventilated area.

 Avoid skin contact with uncured resin.

 Popular Brands

ArtResin – Non-toxic, ideal for artists.

 TotalBoat Epoxy – Great for woodworking and marine applications.

 Pro Marine Supplies – Common for countertops and bar tops.

 Dr. Crafty / MAS Epoxies – Widely used for casting and DIY.

  Things to Watch Out For

Yellowing: Cheaper resins may yellow faster; UV inhibitors help but are not permanent.

 Bubbling: Can occur if poured too thick or mixed too quickly.

 Amine Blush: A waxy surface layer caused by humidity—can be removed with warm water and soap.