Anchor Grout Manufacturers In Patna

Anchor Grout is a two‑part high‑strength polyester resin based grout It is thixotropic meaning it stays in place in vertical or overhead positions and does not flow out of holes It is widely used to anchor steel bolts bars dowels and machinery into concrete masonry or brickwork

Main features

Rapid strength gain

High early compressive and pull‑out strengths

Resistant to vibration corrosion water oils and mild acids or alkalines

Can be placed underwater

Non expansive shrink free once cured

Typical use cases:

Anchoring foundation bolts starter bars base plates safety fences rail tracks and machinery into concrete or rock

Used in damp or underwater conditions due to chemical and corrosion resistance

Useful in applications requiring early load bearing capacity

Technical performance:

Compressive strength may reach 20 MPa in hours and up to 70 MPa over seven days depending on product grade and conditions 

Fast cure means ready for loading within minutes to hours depending on version and temperature 

Mixing and placement:

Provided as pre‑measured two pack components mix thoroughly before use

Inject the mix from the bottom up to avoid air entrapment

No priming or curing required for some powder based variants such as geopolymer anchor grout 

Common suppliers and product names

Bostik Anchor Grout polyester resin based product packaged in 1 kg for holes with diameter difference up to 25 mm 

Navrattan Anchor Grout a geopolymer single component powder activated by water non corrosive non shrink waterproof with rapid gain strength and expansion to hold tight.

Keygrout by DCP a two component fast cure polyester grout has high compressive tensile and flexural strength suitable for vertical and horizontal anchoring under damp condition.

Storage and shelf life:

Shelf life generally ranges from six to twelve months from manufacture if stored in original unopened packaging in dry shaded conditions